How to Pave a Driveway?
You need to know that paving a driveway will need a bit of prepping because it is a difficult process and it needs a lot of consideration. It is important that you make sure that the driveway is poured carefully and accurately so that the base will be good. This is a very important matter and you need to talk to your contractor about that first before you start with the paving because the whole outcome will be based on that procedure. But the sad part about is that the cheapest bids you get will come from companies that will not do the job properly and will just do it all too fast but results would be bad. Choosing a cheap contractor is not about saving money, it will actually be the opposite because you driveway will never last for more than a couple of years.
It is a fact that with a proper base you need to excavate properly as well, you will at least need a foot for the depth. You need to know that the expenses for the excavation will be hefty but it will be worth it, it is not hard to excavate that deep even if it is just a foot. After pouring the base, you will need to add the sub-base which is aggregate, you will need at least six or eight inches. This is going to support the whole driveway properly if the procedure is also being done properly. The sub-base has to be properly compacted so make sure that the water is efficiently drained. You need to make sure before accepting the bid from the contractor that you make sure that all of the service is included so that there will be no additional expenses and misunderstandings.
The next step will also be important, the base layer, it has to be at least two inches thick. When you accept a bid, be sure that they are focused on the compactness of the bases, you need to make sure about that because it is going to be the main key to having a long lasting driveway. If you are unable to find a company that will accept that kind of deal, there are other companies that will use asphalt for the base but they will just compact it down to two inches or a much smaller amount. You need to make sure that the base layer will have two inches for thickness so that it will be able to support the weight of your vehicle.
The Beginner’s Guide to Services
If you want to get everything done perfectly, be sure to follow this guide and your driveway will be in good hands, never go for a cheap contractor because that will just be a headache for you in a couple of years.The Beginners Guide To Services (Getting Started 101)